博文

目前显示的是 二月, 2019的博文

Yingkou Ruizhi Refractories Co., Ltd.

图片
Ruizhi Refractories Yingkou Ruizhi Refractories Co., Ltd. is located in the magnesia city of China, Dashiqiao City, which is very rich in magnesia resource. Ruizhi Refractories is a professional manufacturer of refractory material for high temperature melting furnaces. Ruizhi Refractories’ main products are: Refractory material for converter, electric arc furnace, ladle, LF furnace, tundish, foundry ladle, torpedo ladle, etc. Shaped refractories like magnesia carbon brick, magnesia-alumina carbon brick, magnesia spinel carbon brick, alumina-magnesia carbon brick, carbon free spinel brick, alumina sic carbon brick, etc.; unshaped refractories like repair material, dry vibration mix, nozzle filling sand, gunning mix, ramming mass for electric arc furnace bottom, etc.  Ruizhi Refractories products have been exported to Indonesia, Iran, America, Canada, etc. http://www.ruizhirefractory.com/ Email: sales@ruizhirefractory.com

Ramming process of electric furnace bottom

图片
Ramming mass Ramming process of electric furnace bottom Ramming mass of electric furnace bottom Process of Ramming Mass for Electric Furnace Bottom: 1) Ramming is layer by layer, each layer is rammed with a thickness of 120mm to 150mm, and the last layer is rammed with 100mm. 2) The ramming material is permanently lining the uniform auxiliary layer, and is repeatedly tamped from the periphery to the center by a pneumatic pick or an electric vibrator to a prescribed thickness. In order to prevent ash, the rubber sheet, sack or canvas cover can be used for ramming. The ramming quality can be detected by using a steel rod (φ4mm) prepared in advance and pressed at a pressure equivalent to 0.1MPa, and the insertion depth is preferably not more than 30 mm. 3) The spherical portion of the furnace slope is rammed to a thickness of half of the total thickness and knotted in two layers. 4) The tanning of the furnace slope needs to use a matching template and rammed in two sections. 5) The bo